0.25μm CMOS千兆以太网发送器设计

分析了千兆以太网体系结构,给出了符合IEEE 802.3z标准中1000BASE-X规范的发送器电路结构,并采用TSMC 0.25 μm CMOS 混合信号工艺设计了符合该规范的高速复接电路和锁相环时钟倍频电路.芯片核心电路面积分别为(0.3×0.26)mm2和(0.22×0.12)mm2.工作电压2.5 V时,芯片核心电路功耗分别为120 mW和100 mW.时钟倍频电路的10倍频输出时钟信号频率为1.25 GHz,其偏离中心频率1MHz处的单边带相位噪声仅为-109.7 dBc/Hz.在驱动50 Ω输出负载的条件下,1.25 Gbit/s的高速输出数据信号摆幅可达到410 mV.     

Realization of Tapered Waveguide by Stretching the Rod Waveguide

By stretching the rod waveguide with different velocities in opposite directions, the tapered waveguide can be fabricated. In condition of taking no account of volume expansion caused by heating and under the assumptions of volume conservation,the rod waveguide can be stretched freely in the heated region without being stretched outside of the heated region. A model,which shows the relation of the transition shape and the two factors, that is the ratio of two velocity and the heated region length, is presented for the shape of the taper transition through mathematic deduction. Based on this model, a desired tapered waveguide can be fabricated. The tapered waveguide are widely used for fabricating tapered fiber couplers and sensors. In addition, the conclusion can be used for fabricating fused fiber coupler.     

改进异步电机直接转矩控制系统的仿真研究

本文介绍了直接转矩控制系统的控制原理,并针对基于直接转矩控制的异步电动机运行时存在较大的电流及转矩脉动问题,提出一种新的控制方案,并基于Matlab 6.5对这种新方法进行仿真,仿真结果表明该方案能有效的解决电流及转矩脉动的问题.     

金属基复合材料的热残余应力力学模型研究进展

金属基复合材料在高温制备的冷却过程中或热处理过程中由于组分间热膨胀系数（CTEs）的差异会产生较大的热残余应力，热残余应力对复合材料的宏观性能有着重要的影响。本文综述了分析金属基复合材料热残余应力的有限元模型和解析模型等理论模型，并指出有待深入研究的问题。     

A Pervasive Computing Curriculum for Engineering and Science Students

Today, there's an urgent need for well-trained pervasive computing engineers and scientists. Pervasive computing has evolved into a critical field, influencing a broad range of industries from healthcare to manufacturing to defense. However, most computer engineering and computer science programs pay marginal attention, at best, to the field. In this issue, the authors of the Rochester Institute of Technology describes a set of courses on pervasive computing topics and a supporting laboratory designed for both computer engineering and computer science students     

Dielectric and piezoelectric properties of Pb(Ni1/3Nb2/3)O3–PbTiO3–PbZrO3 ceramics modified with bismuth and zinc substitutions

The dielectric and piezoelectric properties of the (Pb_0.985Bi_0.01)(Ni_1/4Zn_1/12Nb_2/3)_x- (Zr_σTi_1-σ)_1-xO₃ piezoelectric ceramic system (0.2 ≤ x ≤ 0.7, 0.1 ≤ σ ≤ 0.9) were systematically investigated. The results showed that, after poling, the dielectric constant, ε ₃₃ ^T , increased for the tetragonal compositions but decreased for the rhombohedral compositions. Furthermore, high values of ε ₃₃ ^T and piezoelectric modulus, d ₃₁ were found for the compositions along the extension of the morphotropic phase boundary. The highest values of the planar electromechanical coupling factor, K _p, and the piezoelectric modulus, d ₃₁, were found to be 0.70 and − 274 × 10^-12 C N^-1, respectively. The Curie temperature, remanent polarization, coercive field and the lattice constants of the a and c axes in relation to the Pb(Ni_1/3Nb_2/3)O₃ content and the Zr/Zr + Ti ratio were also determined. This revised version was published online in November 2006 with corrections to the Cover Date.     

关于决策支持系统的结构与进化

本文在总结作者开发决策支持系统的实践经验的基础上，从ＤＳＳ的结构分析入手，探讨了ＤＳＳ的进化问题，首先通过软件开发方式，程序设计风范，人工智能道路和系统科学发展等方面的深入剖析，指出了进化能力的强弱是ＤＳＳ成败的关键。其次展开了关于ＤＳＳ结构的研究，提出了ＤＳＳ的外延结构和内涵结构的新概念并进行了比较。随后讨论了ＤＳＳ的进化问题，分析了传统的第一代决策支持系统存在的缺陷，阐述了第二代和第三代决策支     

Polyspectral Analysis of Two-dimensional Mixed Processes and Coupled Harmonics

1　ＩｎｔｒｏｄｕｃｔｉｏｎＩｎｍａｎｙａｐｐｌｉｃａｔｉｏｎｓ,ｓｕｃｈａｓｒａｄａｒ,ｓｏｎａｒ,ｇｅｏｐｈｙｓｉｃｓ,ｒａｄｉｏｃｏｍｍｕｎｉｃａｔｉｏｎａｎｄｍｅｄｉｃａｌｉｍａｇ ｉｎｇ ,ｔｈｅｐｒｏｂｌｅｍｏｆｔｗｏ ｄｉｍｅｎｓｉｏｎａｌｆｒｅｑｕｅｎｃｙｅｓｔｉ ｍａｔｉｏｎｈａｓｒｅｃｅｉｖｅｄａｌｏｔｏｆａｔｔｅｎｔｉｏｎｉｎｒｅｃｅｎｔｙｅａｒｓ.ＩｎｔｈｅｃａｓｅｏｆａｄｄｉｔｉｖｅｗｈｉｔｅＧａｕｓｓｉａｎｎｏｉｓｅ,ｎｕｍｅｒｏｕｓｍｅｔｈｏｄｓｓｕｃｈａｓＭＥＭＰ[1 ] ,ＭＵＳ…     

薄膜干涉型光学全通滤波器的设计与分析

设计并分析了用于多信道色谱补偿的薄膜Gires-Tournois干涉仪（GTI）型光学全通滤波（OAPF），讨论了反射镜的膜层结构对器件 的群延迟谱和反射谱的影响，。以及大角度入射引起的偏分离现象和幅度畸变现象，给出了单级和多级串拉OAPF的初步设计结果。     

利用梯度方向信息的随机Hough变换

针对随机Ｈｏｕｇｈ变换（ＲＨＴ）在处理复杂图像随机采样造成的大量无效积累提出一种改进的用于直线检测的ＲＨＴ，较发地解决了无效果累积问题，并使改进后的算法具有计算速度更快，占用内存更少以及检测性能更好等优点。